You are viewing guidance that refers to, or is for Legacy Landonline.

Capturing Reinstated Marks

This process defines what a reinstated mark is and how to capture it in Landonline.

A reinstated mark is a new mark placed in the ground in the position of a previous mark that has not been found.

How do I capture a reinstated boundary or non boundary mark?

Follow these steps:

  1. Record the mark as a new mark with a new name because it now replaces an existing mark.
  2. Enter the fields in Mark Details:
  • Mark Name: IT 4 DP 4*****
  • MarkState: New
  • Mark Purpose: (As appropriate)
  • Description: (old mark name) reinstated. This mark description will be added automatically to the diagrams when you generate your plans.

Note:

Do not use the ‘Renewed’ functionality for reinstated marks. Link the new mark to the appropriate Landonline mark, if one exists.

Record conflicts in a Pre-validation Report

Reinstated marks linked to existing Landonline marks may cause a mark name / type conflict item. This must be reported on in the pre-validation section of the Survey Report.

You need to comment on the mark reinstatement in the Survey Report.

Want to know more about capturing marks? See related content below.