Record a renewed mark where there is no existing node ID to link to in Landonline

Use this process to record details of a renewed mark where there is no corresponding node to link to in Landonline.

Go to this page if you are looking for assistance with recording a renewed mark that has a node ID in Landonline:
Record a renewed or reinstated mark

Go to this page if you have found a mark that has no record:
Record an old mark with no record

This process records a mark that has been placed in the same position as an old mark that has been physically located and exists on a CSD, but there is no corresponding node to link to in Landonline.

Record a renewed mark with no node ID

1. Capture the mark details for the new mark in the Marks panel

For a non-boundary mark:

  • Mark name: IT # DP 6***** [where 6***** is your new CSD reference, and # is a unique mark identifier]  
  • Mark state: Old
  • Mark purpose(s): Non-boundary, PRM, etc., whichever is appropriate.

For a boundary mark:

  • Mark name: PEG # DP 6***** [where 6***** is your new CSD reference, and # is a unique mark identifier]
  • Mark state: Old
  • Mark purpose: Boundary

2. Select Renewed from the condition field

Double-click on Reliably Placed to open the Condition menu. Select Renewed (located at bottom of list).
 

Image of the marks panel. The condition menu is open, and 'renewed' is highlighted in the list.

3. Complete the Match renewed marks pop-up

Because there is no node to select, select the check box next to ‘There is no node’.  

Type in the original mark name under Name of renewed mark. Do not include “renewed” as this will be added automatically.
 

image of the Match renewed marks panel. 'There is no node' and the Name of renewed mark field are highlighted.

At the top of the panel, under the new mark’s name, the mark description will show as [Old mark name] renewed. This mark description will be added automatically to the diagrams when you generate your plans.
 

image of the Match renewed marks panel. The mark name and description at the top of the panel are highlighted.

Select Continue to save the mark details and close the pop-up.

4. View mark in Marks panel

Note that the mark Condition will have reverted to Reliably Placed. The Description field will reflect the Renewed mark status.
 

image of the marks panel once the renewed mark has been recorded. The Condition has reverted to "reliably placed", but the Description field shows the old mark name with "renewed".

Edit renewed mark details

If you have recorded a renewed mark’s details and then need to edit it:

  1. Double-click into the mark Description field and delete the description, then press Tab to save.
  2. Double-click on the Condition field and re-select Renewed from the list.
  3. Select the check box next to ‘There is no node’.
  4. Edit the name of the renewed mark as needed.
  5. Select Continue. As before, the condition will revert to Reliably Placed, and the description will reflect your updates.
Last updated